Baileigh Manual Tube Bender RDB-050

The Baileigh Manual Tube Bender RDB-050 was designed as an affordable bender that has enough capacity for just about any fabrication shop. The RDB-050 is revolutionary in design, function and capacity.

  • Tackles up to 2.5” OD mild steel with a wall thickness of .120″ and 2” OD Chrome Moly with a wall thickness of .120”.
  • Choose from 3 bending speeds, depending on material type, OD, and wall thickness, to proper speed for each application.
  • Speed 1 produces 4° per pull. This speed has the most torque, suitable for bending 2” OD Chrome Moly or 2.5” OD mild steel.
  • Speed 2 produces 8° per pull for intermediate materials.
  • Speed 3 produces 12° per pull for lighter gauge materials.
  • Bends up to 200° in one shot without you needing to stop and reset the machine.
  • Anti-springback mechanism holds each bend in place as the operator ratchets forward.
  • No assembly or disassembly needed to produce a bend.
  • All pivot points use aluminum bronze bushings and thrust washers for long machine life.
  • Quick-release hook arm inserts assist when you’re changing over the machine to a different size of tubing. You can do a complete changeover in 1 minute or less.
  • Just walk up to the machine, put your tubing into the hook arm insert, and begin bending. When the bend is complete, return the machine to the home position, pull your bend out—and you’re all set.
  • Comes complete with the stand, bend handle, and degree dial. Just add tooling and you’re ready to bend tube.

Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or fill out our online info request form for more information on the Baileigh Manual Tube Bender RDB-050.

Baileigh Manual Tube Bender RDB-050

FEATURES+
  • Dies available for 90 or 180 degrees
  • Replaceable bronze bushings at all pivot points
  • Four bending speeds
  • 180 degree bends, without repining the die
  • Anti-spring back mechanism included
  • Quick change hook sleeve inserts, no u-straps
  • Patent pending
SPECS+
Mild Steel Pipe (Schedule 40) Call for Details
Aluminum Pipe (Schedule 40) Call for Details
Stainless Steel Pipe (Schedule 40) Call for Details
Mild Steel Round Tube (Wall) 2.50″ (.120) — 64mm x 3mm
Aluminum Round Tube (Wall) 2.50″ (.120) — 64mm x 3mm
Stainless Steel Round Tube (Wall) 2.00″ (.120) — 50mm x 3mm
Chromolly Round Tube (Wall) 2.00″ (.120) — 50mm x 3mm
Mild Steel Rod 1.0″ (25mm)
Mild Steel Square Tube (Wall) N/A
Minimum OD .75″ (19mm)
Maximum Speed to 180 Degrees N/A
Maximum Center Line Radius (CLR)* 7.00″ (176mm)
Minimum CLR 3.00″ (76mm)
Power Requirements N/A
Weight (lbs.) 290 (132 kg.)
Length 44.00″ (1118mm)
Width 27.00″ (686mm)
Height 42.00″ (1067mm)
MEDIA+

Video of the Baileigh Manual Tube Bender RDB-050:

OPTIONS+

Please call for more information on Baileigh Manual Tube Bender RDB-050 1 (800) 286-3624

Description

The Baileigh Manual Tube Bender RDB-050 was designed as an affordable bender that has enough capacity for just about any fabrication shop. The RDB-050 is revolutionary in design, function and capacity.

  • Tackles up to 2.5” OD mild steel with a wall thickness of .120″ and 2” OD Chrome Moly with a wall thickness of .120”.
  • Choose from 3 bending speeds, depending on material type, OD, and wall thickness, to proper speed for each application.
  • Speed 1 produces 4° per pull. This speed has the most torque, suitable for bending 2” OD Chrome Moly or 2.5” OD mild steel.
  • Speed 2 produces 8° per pull for intermediate materials.
  • Speed 3 produces 12° per pull for lighter gauge materials.
  • Bends up to 200° in one shot without you needing to stop and reset the machine.
  • Anti-springback mechanism holds each bend in place as the operator ratchets forward.
  • No assembly or disassembly needed to produce a bend.
  • All pivot points use aluminum bronze bushings and thrust washers for long machine life.
  • Quick-release hook arm inserts assist when you’re changing over the machine to a different size of tubing. You can do a complete changeover in 1 minute or less.
  • Just walk up to the machine, put your tubing into the hook arm insert, and begin bending. When the bend is complete, return the machine to the home position, pull your bend out—and you’re all set.
  • Comes complete with the stand, bend handle, and degree dial. Just add tooling and you’re ready to bend tube.

Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or fill out our online info request form for more information on the Baileigh Manual Tube Bender RDB-050.

© Copyright 2024, Ocean Machinery Inc.