Amada VM2500WT
Band Saw

The Amada VM2500WT Band Saw is a Vertical Band Saw for precise cutting of blocks and plates in all material grades.

The Amada Band Saw model VM2500WT has 3 wheels and a wide throat.

  • 7.5 H.P.
  • 2″ Blade
  • Chip Conveyor
  • Cutting Length Control
  • Hydraulic Blade Guides
  • Remote Blade Guide Setting

Selective Cutting Height

  • A cutting height setting can be selected from either 20″ (standard).

Selective Blade Size

  • A blade can be selected from either a standard 2″ x 0.063″ blade.

Use of Servo Motor and Linear Guide

  • An AC servo motor and a LM guide are used to move the table for the purpose of accurate cutting control.

Automatic Adjustment of Guide Position

  • Once a material size is preset, automatic adjustment can be made to determine an optimum guide position. Upon completion of cutting, automatic stop will take place.

Automatically Adjustable Wire Brush

  • Wire brush contact is automatically adjusted in proportion to wear of wire brush. A message will be displayed to prompt a user to replace the wire brush, when excessive wear is detected.

Excellent Operability

  • The color display and touch panel facilitate operation. The embedded CNC-Lite function automatically sets optimum cutting conditions.

Back Gauge (optional)

  • Using an optional back gauge can facilitate the alignment of marks.

Permissible Loading Mass

  • In response to a trend toward larger materials, the machine table offers 11,025lbs loading mass (4,410lbs for VM-1200).

Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or fill out our online info request form for more information on the Amada VM2500WT Band Saw.

Categories: ,

Amada VM2500WT
Band Saw

FEATURES+
  • Band Deviation Monitor
  • Centralized Operator Station
  • Chip Conveyor
  • Cutting Rate Display
  • Hydraulic Blade Guides
  • Motion Detector
  • Remote Blade Guide Control
  • Variable Blade Speed Drive
  • Work Stopper
SPECS+
Cutting Capacity (L x H) 98.4″ x 20″ (2500 x 500 mm)
Throat Depth 42″ (1,050 mm)
Work Load Capacity 11,023 lbs (5,000 kg)
Blade Dimensions 15’4″ x 0.050″ x 1-1/2″ (4670 x 1.3 x 41 mm)
Blade Speed 60-295 ft./min, 60Hz Stepless (17-90 m/min, 60Hz Stepless)
Tension Control Hydraulic
Cutting Control Hydraulic Pressure – Flow Control Valve
Blade Saw Motor 8 HP (5.5 kW)
Hydraulic Pump Motor 2 HP (1.5 kW)
Cutting Fluid Pump Motor 1/2 HP (0.25 kW)
Power Supply Voltage AC220±10%, 3 PH, 60 Hz (Or AC440V, 3PH, 60Hz)
Power Requirement 10.7 kVA
Cutting Fluid Tank Capcity 31.7 gal (120 Liters)
Cutting Fluid Pump Type Electric
Hydraulic Tank Capcity 10 gal (38 Liters)
Chip Disposal Chip Conveyor
Feed Mechanism Table Feed, Hydraulic
Feed Stroke 100.4″ (2,550 mm)
Machine Dimensions 100″ x 230″ x 106″ (2540 x 5845 x 2700 mm)
Table Height (Above Floor) 39.4″ (1,000 mm)
Machine Weight 15,432 lbs (7,000 kg)
MEDIA+

Please call for more information about Amada band Saw Model VM2500WT 1 (800) 286-3624

OPTIONS +

AXCELA G SERIES Band Saw Blades

High-performance Carbide Tipped Band Saw Blades
High-quality carbide tips and the dove tail tooth shape. AXCELA makes incredible cutting speed for hard to cut material.

BCTBR Band Saw Blade

Multi Faceted Carbide Tipped Blade

Designed exclusively for heat-resistant alloys, nickel-based alloys, titanium alloys, and special cast tensile steels, all with high tensile strength of over 142,000 psi. It features ultra-hard, diamond sharp carbide tipped teeth that resist low thermal conductivity and abrasion that can quickly break down conventional bi-metal type bands.

MAGNUM HI-LO Band Saw Blade

Patented Varying Tooth Height and Set M-71 Bi-metal Blade
High-quality carbide tips and the dove tail tooth shape. AXCELA makes incredible cutting speed for hard to cut material.

Hi-Lo Band Saw Blade

Varying Tooth Height Design, M-42 Welded Edge

The Hi-Lo blade features a high and low teeth height design and a 15-degree rake angle. The blade is ideal for cutting hard steels.

CHIP BREAKER Band Saw Blade

Patented Gullet Design
Designed to reduced heat generated at increased chip load. With reduced tooth stripping and breaking this equates to the lowest possible cost per square inch of metal cutting.

SGLB Band Saw Blade

M-42 Bi-metal Blade

The SGLB was designed to cover a broad range of cutting applications and to provide maximum efficiency in sawing wear-resistant tool steels. The blade’s tough M-42 cobalt edge resists heat and abrasion, while the varied pitch tooth form expands the ranges of sizes and shapes that can be sawed successfully without changing blades.

COBALT8 Band Saw Blade

Amada Modified M42 High-Speed Steel Bi-Metal Blade
General-purpose blade ideal for cutting mild steel and structural steel. “Chip Curler” tooth shape and unique set pattern result in longer blade life.

SMARTCUT BAND Band Saw Blade

Thinner Blade of SGLB and Magnum Hi-Lo

Thinner more than 10% from regular SGLB or Magnum Hi-Lo. Specialized Blade for PCSAW330

PROTECTOR EX M42 Band Saw Blade

Exclusive use for structural steel with M-42 Edge. Which has both strength against tooth chipping and high wear resistance. PROTECTOR EX added to the back face of the tooth tip prevents excessive cutting.

PROTECTOR Band Saw Blade

Exclusive Use for Structual Steel with M-30 Matrix Bi-metal Blade

Exclusive use for structural steel. Protector provides long blade life and prevents tooth breakage, eliminating excessive tooth stripping. It can withstand the shock of interrupted cuts, allowing for heavier penetration for faster cutting rates. Protector uses a broaching style set pattern designed to eliminate pinching, which prevents the blade from binding the cut.

MGLB Band Saw Blade

General Purpose Matrix Bi-metal Blade

The MGLB is best suited for cutting structural shapes, tubing and stacks of mild steel pieces. The MGLB allows band saw machines to cut a wide range of material sizes and shapes without requiring a change of blades. Its tough high-speed steel teeth resist chipping, stripping and abrasion. It can also tolerate the occasional improper speeds and feeds that are often used by inexperienced saw operators.

Description

The Amada VM2500WT Band Saw is a Vertical Band Saw for precise cutting of blocks and plates in all material grades.

The Amada Band Saw model VM2500WT has 3 wheels and a wide throat.

  • 7.5 H.P.
  • 2″ Blade
  • Chip Conveyor
  • Cutting Length Control
  • Hydraulic Blade Guides
  • Remote Blade Guide Setting

Selective Cutting Height

  • A cutting height setting can be selected from either 20″ (standard).

Selective Blade Size

  • A blade can be selected from either a standard 2″ x 0.063″ blade.

Use of Servo Motor and Linear Guide

  • An AC servo motor and a LM guide are used to move the table for the purpose of accurate cutting control.

Automatic Adjustment of Guide Position

  • Once a material size is preset, automatic adjustment can be made to determine an optimum guide position. Upon completion of cutting, automatic stop will take place.

Automatically Adjustable Wire Brush

  • Wire brush contact is automatically adjusted in proportion to wear of wire brush. A message will be displayed to prompt a user to replace the wire brush, when excessive wear is detected.

Excellent Operability

  • The color display and touch panel facilitate operation. The embedded CNC-Lite function automatically sets optimum cutting conditions.

Back Gauge (optional)

  • Using an optional back gauge can facilitate the alignment of marks.

Permissible Loading Mass

  • In response to a trend toward larger materials, the machine table offers 11,025lbs loading mass (4,410lbs for VM-1200).

Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or fill out our online info request form for more information on the Amada VM2500WT Band Saw.

© Copyright 2024, Ocean Machinery Inc.